EGR removal Wigan, mobile service, £220 fixed

Wigan's industrial and trade economy has always been built around working vehicles. The motorway corridor through the borough carries significant freight and commercial traffic, and the town's own industrial estates, Pemberton, Lamberhead Green, and the areas around Ince, support a dense base of trades, hauliers, and construction operators who depend on their diesel vehicles every working day.

Book it in Call 0161 694 7331

For off-road and track use only.

Mobile We come to you

Software only No physical parts removed or replaced

Flat £220 No surprises

Same or next day In most cases

About EGR removal in Wigan

We offer a mobile EGR removal service in Wigan. We come to you and carry out a full software-based EGR removal through the OBD port. The ECU is modified to permanently disable the EGR system and suppress all associated fault codes. Nothing is physically removed from the vehicle.

“EGR removal” and “EGR delete” are the same modification under two different names. Both are common search terms; both lead to the same process and outcome.

Price: £220 fixed. Call 0161 694 7331.

Book it in Call 0161 694 7331

Diagnostic tablet connected to a car at the dashboard

Emissions pipework and valve in a diesel engine bay

Trade and industrial vehicles in the Wigan area

The vehicle types that dominate Wigan's working economy, panel vans, flatbeds, tipper trucks, and tradespeople's day vans, are among those most prone to early EGR faults. Vehicles doing short urban runs, loading and unloading multiple times per day, or running between industrial units across town accumulate EGR carbon deposits quickly.

The motorway access routes also mean Wigan-based operators often run high-mileage mixed routes: urban pick-ups and drops combined with motorway legs down to Warrington or up toward Preston. That combination of duty cycles is consistently associated with faster EGR valve deterioration.

When the ECU logs an EGR fault and drops the engine into limp mode, the day's work stops.

Book it in Call 0161 694 7331

How EGR removal works

We arrive at your location with everything needed to carry out the job. The OBD port is used to access the ECU; we rewrite the EGR-relevant mapping to disable the system and then clear all stored fault codes. The modification takes around an hour.

The vehicle drives away under its own power with full engine performance restored. No engine bay access. No physical disassembly. The modification is entirely within the vehicle's software.

Book it in Call 0161 694 7331

Technician reading a diagnostic tablet from the driver's seat of a van

Technician at work beside a customer's van on a driveway

Wigan coverage

Wigan is well within our 40-mile operating radius from Eccles. We cover Wigan town centre, Leigh, Hindley, Ashton-in-Makerfield, Abram, Standish, and surrounding areas. We come to industrial estates, yards, domestic addresses, and any location where the vehicle can be safely accessed.

Call now: 0161 694 7331

Book it in Call 0161 694 7331

Frequently asked questions

My van is in limp mode and I cannot get it to a garage, can you still reach me?

Yes. We are mobile by design. If the vehicle can reach a stationary location, even if it is driving under limp mode at reduced speed, we can come to it. Call us and tell us where the vehicle is.

Do you cover Leigh and Hindley?

Yes. Both are well within our Wigan coverage area.

What makes EGR removal better than just cleaning the valve?

Cleaning buys time. On vehicles with significant mileage or a history of repeat EGR faults, the valve typically clogs again within months. Removal eliminates the system from the ECU entirely so the fault cannot recur.

Is the modification reversible?

The ECU modification can be reversed to the original map if needed, but in practice this is rarely requested. Call us to discuss if reversibility is a consideration for your use case.

EGR removal across Greater Manchester

Other areas we cover:

EGR delete across Greater Manchester