EGR removal Ashton-under-Lyne

Limp mode cleared. EGR fault resolved. Mobile service, £220 fixed.

Mobile We come to you
Software only No physical parts removed or replaced
Flat £220 No surprises
Same or next day In most cases

The outcome, stated plainly

Once the modification is complete, the ECU no longer commands the EGR valve. The fault code does not return. Limp mode caused by the EGR system does not recur. The vehicle runs without the EGR cycle, and the modification is permanent, there is no cleaning schedule, no second replacement, no return visit six months later.

We carry out the work at your location in Ashton-under-Lyne. The job goes through the OBD port, the engine bay stays closed, no components are removed or disturbed. We arrive, run a pre-remap diagnostic, write the modified ECU map, verify the result, and clear stored fault codes before leaving. £220 fixed, no extras.

SGR Automotive has worked on over 7,000 vehicles across its services. EGR removal is a specialism, not a sideline. Same-day and next-day availability is common across Tameside, call to check current slots.

Diesel dashboard warning lights lit at night
Reading stored fault codes on a diagnostic tablet in the cab

What the modification involves

EGR removal, also called an EGR delete, is a software remap of the ECU. Both terms describe the same service. We connect to the OBD port, write a modified map that removes the EGR system from the engine's operating parameters, and the valve is disabled in software. The valve stays physically in place, bolted and untouched. The engine simply stops using it.

Before any remap is written, we read and log all current fault codes. After the remap, codes are verified and all EGR-related entries cleared. Limp mode caused by the EGR fault resolves. The modification does not wear out, does not need repeating, and does not leave the vehicle reliant on a component that was already failing.

Duration: around 60 to 90 minutes at your location. No recovery required.

The visit

We arrive at your location, home, work, commercial yard, or car park. The OBD port is the only access point. Pre-remap diagnostic first, then the remap is written, the result verified, and fault codes cleared. The vehicle stays where it is from start to finish. If you also need a DPF delete, that can be handled in the same visit, call to discuss.

Diagnostic tablet connected to a car at the dashboard
Technician at work beside a customer's van on a driveway

Coverage in Ashton-under-Lyne

We are based in Eccles, around 9 miles from Ashton-under-Lyne. We cover Ashton town centre, Guide Bridge, Droylsden, Dukinfield, and the wider Tameside area. Good motorway access at Denton puts most of east Greater Manchester within easy reach. Same-day availability is common for this area.

Frequently asked questions

How quickly can you get to Ashton-under-Lyne?
Ashton-under-Lyne is about 9 miles from our Eccles base. Same-day and next-day appointments are common for this area. Call 0161 694 7331 to check current availability.
Can you do an EGR removal and a DPF delete in the same visit?
Yes. If the vehicle needs both modifications, we can carry them out in the same visit. Call to discuss your vehicle and we will confirm what is involved and the total cost.
Is there a guarantee on the modification?
The remap is permanent and does not degrade. We verify the result before leaving, if something is not right, we will not pack up until it is. Call us if you have any concerns after the visit and we will sort it.
What vehicles do you work on?
Diesel cars, vans, and light commercial vehicles. The modification applies to any diesel vehicle with an EGR system, which covers the majority of diesels built from the mid-2000s onwards. Call with your make, model, and year to confirm before booking.

Book your mobile EGR removal in Ashton-under-Lyne

Call 0161 694 7331 to book. Same-day and next-day availability common across Tameside. £220 fixed, covers the visit, remap, and verification. We come to you, software-based, no dismantling required.