EGR removal Bolton, mobile service, £220 fixed

Bolton runs on commercial vehicles. From the vans working the industrial estates to the HGV support fleets using the motorway network, diesel power keeps a significant amount of Bolton's economy moving. When an EGR fault brings one of those vehicles to its knees in limp mode, the job stops with it.

For off-road and track use only.

Mobile We come to you
Software only No physical parts removed or replaced
Flat £220 No surprises
Same or next day In most cases

About EGR removal in Bolton

We offer a fully mobile EGR removal service in Bolton. We come to your yard, depot, or driveway, connect to the vehicle through the OBD port, and carry out a complete software-based EGR removal directly on the ECU. No parts are physically removed. The work takes around an hour.

“EGR removal” and “EGR delete” describe the same modification, a software rewrite of the ECU that disables the EGR system and suppresses associated fault codes. If you have seen either term, you are looking at the same service.

Price: £220 fixed. Call 0161 694 7331.

Reading stored fault codes on a diagnostic tablet in the cab
Emissions pipework and valve in a diesel engine bay

Why EGR faults are common on Bolton's working vehicles

The main roads through the borough carry a constant flow of diesel vans doing short, stop-start runs between Bolton town centre, Farnworth, Horwich, and the surrounding industrial estates. Short-run diesel use is one of the main contributors to EGR valve carbon build-up: the engine never gets hot enough to burn off deposits, and over time the valve clogs.

The motorway network adds another layer, commercial vehicles making repeated motorway runs between Bolton and Manchester accumulate mileage quickly, and high-mileage diesel engines are disproportionately represented among EGR fault cases.

Once the ECU detects that the EGR system is not performing correctly, it logs a fault code and drops the engine into limp mode. The vehicle loses power and often becomes undriveable for working purposes.

Software-only removal, nothing physically touched

Our EGR removal is carried out entirely through software. We plug into the vehicle's OBD port, modify the ECU mapping to disable the EGR system, and clear all associated fault codes. No valve is physically removed, no blanking plates are fitted, and no pipework is cut.

The result is a cleaner modification than a physical delete and leaves the engine bay entirely undisturbed.

Diagnostic tablet connected to a car at the dashboard
ECU remapping equipment set up in the back of the service van

We come to you anywhere in Bolton

We are based in Eccles and cover Bolton comfortably within our standard 40-mile radius. Whether your vehicle is sitting at a yard in Horwich, a unit on the Middlebrook Retail and Leisure Park fringe, or a driveway in Westhoughton, we come to you.

No need to arrange recovery or lose a van to a garage for a week. We aim to visit promptly on commercial callouts.

Call now: 0161 694 7331

Frequently asked questions

What vehicles do you cover in Bolton?
We work on most common diesel vans and light commercials including Ford Transit, Vauxhall Movano and Vivaro, Mercedes Sprinter, Volkswagen Transporter and Crafter, Fiat Ducato, and Renault Trafic and Master. Call us with your make, model, and year before booking to confirm compatibility.
Will this fix my limp mode?
If the limp mode is being caused by an EGR fault code, yes. Once the ECU modification is complete and fault codes are cleared, the engine management system will no longer trigger limp mode due to the EGR. Power should return immediately.
How long does the job take?
Around an hour on site in most cases. We connect through the OBD port, carry out the software modification, verify the result, and clear stored codes. There is no stripping of the engine bay required.
Is this legal for road use?
EGR removal is for off-road and track use only. You are responsible for ensuring your vehicle complies with the emissions requirements that apply to your use case.